7.10 Using the implement
REQUIREMENTS
Tractor control units unlocked
Implement unfolded
Road safety bars removed
Coulter working depth is set
For using the crushboard: working depth of the
crushboard is set
For using the levelling unit: levelling unit is
activated and set
For using the trailing element: trailing element
is set
For using the traction assistance: traction
assistance is switched on
Implement is lowered
For using the cutting roller: cutting roller is
lowered
When all of the requirements have been met,
drive off with the tractor.
7.11 Turning on the headlands
IMPORTANT
Damage to the soil tillage implements
If the implement is not lifted when turning,
it can result in damage to the soil tillage
implements.
Only turn the implement on the running
gear.
1.
If the implement is equipped with a rigid
drawbar,
perform steps 2 to 5.
2.
Before turning on the headlands, lift the
implement according to the section "Lifting
implements with rigid drawbar", see page 50.
3.
Turn around.
CMS-T-00009978-A.1
CMS-T-00009979-A.1
7 | Using the implement
Using the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
76
