10.1.17 Cleaning the compressed air line filter
INTERVAL
After the first 200 operating hours
Every 3 months
NOTE
The coupling head contains a tensioned spring.
Bolt tightening torques:
1
2.5 Nm
2
7 Nm
1.
Unscrew the bolts
1
.
2.
Loosen the bolts
2
by a few turns.
3.
Lift the housing plate
3
and turn it to the side
over the rubber seal
4
.
4
3
2
1
CMS-I-00003574
4.
Remove the rubber seal.
5.
Replace damaged parts.
6.
Clean the sealing surfaces, seal ring and
compressed air line filter.
7.
Grease the sealing surfaces, seal ring and
compressed air line filter.
CMS-I-00003573
8.
Check the position of the seal ring.
9.
Reassemble in the reverse sequence.
CMS-I-00003572
CMS-T-00004590-C.1
10 | Repairing the implement
Maintaining the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
97
