Amazone Amalog, Operating Instructions Manual, Page: 21 / 32

21
AMALOG DB 550-1 05.03
3. Converting the number of crank turns
Example:
Type of seed drill: AD-P02
Working width: 3 m
Imp./100m (actual): 1005
Imp./100m (table 2): 1053
Number of crank turns (table 2): 22,5
Number of crank turns (actual): ?
crank turns (actual)=crank turns (table 2) x conversion factor
Imp./100m (actual)
Conversion factor =
Imp./100m (table 2)
1005
Conversion factor =
1053
= 0,95
Number of crank turns (actual)
= 22,5 x 0,95 = 21,4
5.2.5.1.2 Enter the working width
For determining the worked areas AMALOG requires
the information of the working width. To enable it
enter the working width as follows:
- Press key
- Dial the desired working width [m] by pressing
keys or , e. g. "3.00" for 3 m working
width.
Display working width
•
Press key and store the selected value.
•
Press key once again and check stored
value. The display must not show the chosen
value, e. g. "3.00".