9
10
Countertop installation
Remove all packing material and accessories. Examine the oven for any damage, such as
dents or a broken door. Do not install the oven if it is damaged.
Cabinet:
Remove any protective film from the oven. Do not remove the light brown mica
cover that is attached to the oven cavity.
A) Select a stable and level surface that provides enough open space for the intake
and/or outlet vents.
• The minimum installation height is 36 in (91.4 cm) above the floor
•
The back of the appliance should be placed against a wall, allowing for any
necessary clearance. Leave a minimum clearance of 12 in (30 cm) above the oven.
A minimum clearance of 3 in (8 cm) is required between the oven and any
adjacent walls.
• Do not remove the legs from the bottom of the oven.
• Blocking the intake and/or outlet openings may damage the oven.
• Place the oven as far as possible from all radios, TVs, and compatible voice
assistants as possible. Operation of this oven may cause interference to radio or
TV reception.
B) Plug your oven into a standard grounded household outlet. Make sure the voltage and
frequency are the same as the voltage and frequency on the rating label.
C) Place other wireless devices at least 12 in (30 cm) away from the oven.
WARNING:
A) Do not install the oven over a range cooktop or other heat-producing appliance.
Installation near or over a heat source could damage the oven and void its warranty.
B) Do not place the oven near combustible materials or in an area where heat, moisture,
or high humidity are produced.
C) Do not operate the oven without placing the glass tray and turntable ring in their
proper positions.
Wi-Fi
device
Min 12 in (30 cm)
Min 3 in
(8 cm)
Min 36 in
(91.4 cm)
D) Make sure that the power supply cord is not damaged and that it doesn’t run under
the oven or over any hot or sharp surfaces.
E) The outlet must be readily accessible so that it can be easily unplugged in the case of
an emergency.
F) If the power cord is too short, contact a qualified electrician or service technician to
install an outlet near the appliance.
G) Do not let the power cord hang over the edge of your counter or other surface.
H) For best operation, plug this appliance into its own electrical outlet to prevent any
lights from flickering, blowing a fuse, or tripping the circuit breaker.
I)
A short power supply cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
J) Longer cord sets or extension cords are available and may be used if care is exercised
in their use.
K) If a long cord or extension cord is used:
• The marked electrical rating of the cord set or extension cord should be at least as
great as the electrical rating of the appliance;
• The extension cord must be a grounding-type 3-wire cord; and
• The longer cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
Connecting your Smart Oven to
Wi-Fi
Your oven can be controlled with
Wi-Fi
by using any
Wi-Fi
enabled device. To control
your oven using
Wi-Fi
, you’ll need to set up your microwave and connect to
Wi-Fi
. To do
so:
1.
Download the latest version of the app from the app store.
2.
Plug the oven into a power outlet that is grounded.
3.
Open the App, then tap the Devices icon in the lower right and add your
microwave as a new device.
4.
Follow the on-screen instructions to set up your microwave.
Once your microwave is set up, the microwave will beep and the LED will show the
Wi-Fi icon
, and display the local time in your location.
Once setup is complete, you can access the microwave Settings page through the Devices
section of the App.
Note:
It may take a few minutes for the LED to display the correct local time.