background image

4

SAVE THESE INSTRUCTIONS

Read these instructions carefully and retain them for future use. If this 
product is passed to a third party, then these instructions must be 
included.   

When using electrical appliances, basic safety precautions should always be followed 
to reduce the risk of fire, electric shock, and/or injury to persons including the 
following:

CAUTION

  Risk of Energy Hazard!

 12 V, 9 Ampere-hour battery. Before 

replacing batteries, remove conductive jewelry such as chains, wrist 
watches, and rings. High energy through conductive materials could 
cause severe burns.

CAUTION

  Risk of explosion! 

Do not dispose of batteries in fire. The batteries 

may explode.

CAUTION

  Risk of injury! 

Do not open or mutilate batteries. Released material 

is harmful to the skin and eyes. It may be toxic.

CAUTION

  Risk of electric shock! 

A battery can present a risk of electrical 

shock and high short-circuit current. The following precautions 
should be observed when working on batteries: 
a) Remove watches, rings, or other metal objects. 
b) Use tools with insulated handles. 
c) Wear rubber gloves and boots. 
d) Do not lay tools or metal parts on top of batteries. 
e) Disconnect charging source prior to connecting or disconnecting  
  battery terminals.

•  Disconnect Device Requirement -  for PLUGGABLE EQUIPMENT, the socket-

outlet shall be installed near the equipment and shall be easily accessible.

•  The maximum ambient operating temperature of the product is 104 °F (40 °C).
•  Do not use surge protectors or extension cords with the product.
•  Do not use for medical or life support equipment.
•  Do not use with or near aquariums.
•  Do not use the product on transportation means. 
•  Intended for installation in a temperature controlled, indoor area free of conductive 

contaminants.

WARNING

 

Risk of fire, explosion, or burns! 

Do not disassemble, heat above 

140 °F (60 °C), or incinerate the battery.

CAUTION

  Risk of electric shock! 

Do not remove the cover except to replace 

the battery. Turn off and unplug the product before replacing the 
batteries. There are no user serviceable parts inside except for the 
battery.

CAUTION

  Risk of fire! 

To reduce the risk of fire, connect only to a circuit provided 

with 20 amperes maximum branch circuit over current protection in 
accordance with the National Electric Code, ANSI/NFPA 70.

Summary of Contents for B07RRYB3RJ

















Reviews: