6
Inflating Sporting Equipment (i.e. basketball, football)
1. Turn on the car engine and roll out the 12 V cord and connect the 12 V adaptor to the outlet.
2. Screw the ball/balloon adaptor into the thread connector.
3. Insert the ball/balloon adaptor into the valve of the object to be inflated.
4. Adjust your desired pressure by pressing button ‘ ’/ ‘ ’. Press button ‘ ’ to increase the
pressure gauge and press button ‘ ’ to decrease the pressure gauge. Once the desired
pressure is reached, the displayed figure will flicker for several times, then return to 0.0 PSI.
That means the pressure is pre-set successfully. The product is ready for inflating.
5. Press the button ‘set’ to display pressure in PSI/BAR.
6. Remove ball/balloon adaptor from the inflated object’s valve and unscrew ball/balloon adapter
from the thread connector.
7. Disconnect the 12 V adaptor from the outlet and store the 12 V cord in the compartment area.
How To Replace The Fuse In The 12 V Plug
1. To replace the fuse in the plug, twist off the upper cover.
2. Remove the faulty fuse and insert a new 15 A fuse.
3. Twist the cover back on the plug.
B074DDJFTH-AmazonBasics-Digital 12V Tire Inflator-IM-V03 (EU).indb 6
11/17/17 3:12 PM
