8
Adjusting the tilt tension
If the notebook tray is falling forward (tilts towards fl oor), loosen the screw by turning it to the left. If
the notebook tray is falling back (tilts toward ceiling), tighten the screw by turning it to the right.
Caution:
•
Do not remove the screw. The notebook tray might fall.
•
Do not over-tighten the screw. You might damage your notebook mount.
Safety and Compliance
IMPORTANT:
This product will need tension adjustments after installation is complete. Make
sure that all equipment is properly installed on the product before attempting range of motion
or tension adjustments. Any time equipment is added or changed on this product resulting in a
different mounted weight, you should repeat the adjustment steps to ensure safe and optimum
operation. This product should move smoothly and easily through the full range of motion and
stay where you set it. If movement is diffi cult or the product does not stay where you set it,
follow the adjustment instructions to loosen or tighten the tension to create a smooth, easy
motion. Depending on your product and the adjustment, it may take many turns to notice a
difference.
© 2015 Amazon.com, Inc. or its affiliates. All Rights reserved. Amazon and the AmazonBasics logo are trademarks of
Amazon.com, Inc. or its affiliates. Made in China
