Amazon BUBBLER 361755REF, Getting Started Manual

Page: 13 / 20

11
To wirelessly connect to the Amazon, either plug in the
USB Wi-Fi adaptor or, if the Wi-Fi adaptor is already
connected to the Amazon, press the Wi-Fi button
on the top pannel to enable the Wi-Fi connection.
The Amazon will begin setting up a Wi-Fi hotspot.
After a few seconds, an internal LED on the Wi-Fi
adaptor will begin blinking, indicating the hotspot
connection is ready. The hotspot connection will
typically become available within ten seconds. Once
the hotspot is active, navigate to the Wi-Fi networks
setting of your Wi-Fi enabled device. Refreshing the
list should reveal an Amazon Wi-Fi hotspot. Connect
to the hotspot. Connecting to the hotspot’s network
generally occurs within ten seconds. After successfully
connecting, open a web browser and navigate to
http://172.20.20.20/. If the hotspot connection was
successful, the Amazon user interface will appear in
the browser window.
USB Wi-Fi Connection
Wireless networks appear under the Settings application, listed under the Wi-Fi topic. Wireless
networks are automatically refreshed every few seconds. Simply touch a network to connect to it.
A checkmark will appear next to the network once a connection has been made. Open the Safari
web browser and navigate to
http://172.20.20.20/.
Wireless networks appear under the “Network Status” icon in the system tray, next to the clock.
Left click on the Network Status icon to show available wireless networks. The listing of wireless
networks can be refreshed by pressing the Refresh button in the upper right corner. Select the
Amazon network and press the Connect button. Once the connection has been established, open
Internet Explorer and navigate to
http://172.20.20.20/.
Note: The user interface will be displayed on only one hardware connection (Wi-Fi or USB device
cable) at a time. The USB Wi-Fi connection takes precedence when plugged in. Thus if using the
USB device cable, be sure to have the USB Wi-Fi adaptor unplugged from the data logger. Or if
the USB device cable is currently active, the Wi-Fi adaptor will have no effect when plugged in (i.e.
the Wi-Fi signal will not be activated). The USB device cable supports a single connection whereas
multiple devices can connect to the Wi-Fi adaptor at the same time.
IOS
Windows 7
The Web Interface
Amazon Bubbler Wi-Fi Button