Amax Voyage Aeronuatics PA-1009 Instruction Booklet Download Page 3

REMOTE CONTROL DIAGRAM

SYNCING YOUR HELICOPTER

 

Your 

PA-1009 

utilizes an automatic 2.4G selection system that allows up to 8 people to fly side by side 

in the same wireless range.

FOR ONE PERSON PLAY:

1. Before starting, make sure that both your remote control and helicopter are turned OFF.
    Make sure that there are no other 2.4G devices nearby. 
2. Turn ON the helicopter and set it down on a flat surface. The red LED indicators flashing on the   
     helicopter head,  This means your helicopter is searching for a controller to pair with.
3. Turn ON your remote control.  Roll the Throttle wheel forward and Roll the Throttle wheel  

 

   backwards.The LED indicators on the helicopter stay solid,  indicating that the helicopter and    
    remote control are synced.  When this happens you have properly  synced your helicopter and you  
  are ready to fly.  
    Note: If the LED indicators do not stay solid, repeat steps 1-3 to sync the helicopter again.

FOR MULTI-PERSON PLAY: 

4. Before starting, make sure that all of the helicopters and remote controls are turned off. Make sure 
    that there are no other 3 devices nearby.
5. Players must sync their helicopters successively.  Make sure that no one else is syncing while you 
    sync your helicopter by following steps 1 to 3 above.
6. When a player’s helicopter is synced and working it should be left ON while the other players sync 
    their helicopters.
7. Should there be a mistake or interference,  all players must turn off their remote controls and 
    helicopters and start the process all over again.

3

4

HELICOPTER DIAGRAM

Below is a basic list of features and parts on the helicopter.

Stabilizer Bar

Landing Gear

Charging Socket

Power Switch

Body Shell

Main Rotor Blades

Tail Blade

Power Button

Calibrating /Speed Button

Throttle Wheel
Start & land

USB Cover

Power Indicator
Charging Indicator

PREPARING FOR FLIGHT

• Verify that there are the helicopter and remote control has been fully charged.

• Make sure your helicopter is turned on and properly synced to your remote control (See “SYNC YOUR HELICOPTER”  below).

• Fly only in a large room free of obstacles with an open radius of at least 25 feet. Close all windows and 

  doors, turn off fans and close air ducts or any other openings that may cause drafts in the room.

  IMPORTANT: YOUR PA-1009 HELICOPTER IS DESIGNED FOR INDOOR USE ONLY. DO NOT FLY OUTDOORS.

 

LED Lights

Reviews: