HOW TO DO 360º STUNT ROLLS
1. In order to make your VA-2080 do 360º rolls you must fully charge your battery.
Note: The VA-2080 will not do 360º stunt rolls under low battery indication.
2. Once you are ready to attempt a 360º roll, simply depress and let go of the "STUNT" button on the top
right hand side of your controller (see Remote Diagram on page 3). You will hear beeping sounds, this
means you are now in “STUNT MODE."
3. Now quickly move your right control stick in any of 4 directions; up, down, left or right. Your VA-2080
drone will instantly roll in the associated direction. See diagram below.
Note: After performed the stunt roll, the beeping sounds will stop. Repeat step 2 to 3 if you wish to do it
again.
If the VA-2080 becomes unstable during the course of flying, you
may need to calibrate the internal gyros. To do this place the
VA-2080 on a flat level surface. Do not start the blades. Instead
move both the throttle and control stick down and to the right
corner . The LEDs on the VA-2080 will flash quickly and then
remain solid. This indicates your drone has been recalibrated
(see diagram E).
FLIGHT CONTROL
Move the Throttle up to increase the speed of
the motors and the VA-2080 will rise up.
Move the Throttle down to decrease the speed of
the motors and the VA-2080 will descend.
Move the Throttle stick left and the VA-2080
will rotate left.
Move the Throttle stick right and the VA-2080
will rotate right.
Move the Direction Control up and the VA-2080
will move forward.
Move the Direction Control down and the VA-2080
will move backward.
Move the Direction Control left and the VA-2080
will bank to the left.
Move the Direction Control right and the VA-2080
will bank to the right.
7
8
F
360˚Stunt Roll
G
CALIBRATING THE VA-2080
E
