NOTE: The use of the Trim buttons are accompanied with a beep tone. A single long beep indicates the product is
centre-trimmed. No beeping after press the trim button indicates the product is trimmed to the maximum on a particular side.
UNDERSTANDING TRIM ADJUSTMENTS
Forward/Backward Trim
�• If your VA-2080 is moving forwards or backwards automatically, you may need to adjust the
FORWARD/BACKWARD TRIM buttons.
•�If your VA-2080 flies forward, push and release the Backward TRIM button repeatedly until the
moving stops and proper flight is maintained.
•�If your VA-2080 flies backwards, push and release the Forward TRIM button in the same manner
until the problem is resolved.
• From time to time you may have to adjust the FORWARD/BACKWARD TRIM to ensure the VA-2080
will hover in mid-air and respond accurately to your commands.
Banking Left/Right Trim
�• If your VA-2080 is not steadily hovering and is banking to the left or right automatically, you may
need to adjust the BANKING TRIM buttons.
• If your VA-2080 banks to the left, push and release the R Trim button repeatedly until the banking
stops and proper flight is maintained.
• If your VA-2080 banks to the right, push and release the L Trim button in the same manner until the
problem is resolved.
• From time to time you may have to adjust the BANKING TRIM to ensure the VA-2080 will and respond
accurately to your commands.
RECOGNIZING THE FRONT AND REAR OF THE VA-2080
Even though the VA-2080 has four rotors there is still a front or forward-facing
direction and back or backwards-facing direction. The Front and forward-facing
direction of the VA-2080 is the side with white color head light. The rear and back
of the VA-2080 is where the power ON/OFF is. The VA-2080 when in flight will also
help you keep aware of the orientation with lighted LED lights in the arms of the
VA-2080.
NOTE: The front of the VA-2080 displays WHITE LED lights and the back of the VA-2080
displays RED LED lights.
Forward/Backward
Trim Controls
Push backward trim button
Push forward trim button
If flying forward...
If flying Rightward...
If flying Leftward...
If flying backward...
Left/Right Banking Controls
Push the “ L ” trim button
to increase left banking
sensitivity
Banks Trim
Banks Trim
AUTOMATICALLY TAKE OFF / LAND
Forward/Backward Trim
Push the “ R ” trim button
to increase Right banking
sensitivity
Make sure you have properly synced The VA-2080.
• simply press the Auto Start/Land button, your VA-2080 will
automatically take off.
• To stop or land the VA-2080 just Press the Auto Start/Land button
again and the VA-2080 will descend and land automatically
(see diagram D).
Tips: You also can move the two control sticks simultaneously down
inside or outside corners, hold them till you hear a “beep” and the blades
start spinning. Release the control sticks and push the throttle stick
slowly to take off manually (see diagram D1).
5
6
Front
Rear
A
If you have successfully synced your VA-2080 to your controller as explained on page 4 you are now ready to fly.
Before beginning to fly your drone you should familiarize yourself with how to start and stop the rotors, how to
use your take off and auto land feature and how the controls work. Please carefully read and familiarize yourself
with various control features explained in the next few pages. Once again as a beginner pilot you should learn
how to control your drone in a large open field or park on a day with zero or very light wind. Do not try to fly your
VA-2080 too high until you become a more experienced pilot.
NOW YOU ARE READY TO FLY!
UNDERSTANDING THE ALTITUDE LOCK
The VA-2080 has a unique Altitude Lock function. With the help of air pressure sensor you can control, your
VA-2080 more stable than ever. The sensor locks in the altitude of the drone while allowing the user to adjust
the directional control without having to hold the throttle.
After starting the Drone, fly upwards to a safe height. Once at a safe height, let go of the throttle control, your
VA-2080 should lock in the altitude and allow the user to focus on getting used to the directional controls.
NOTE: The altitude sensor does have some tolerance based on atmospheric conditions and could have
a slight variation in altitude.
SPEED SETTING BUTTON
The VA-2080 has 3 speed settings;
1(SLOW),2(MEDIUM)
and
3(HIGH)
. The Default setting when you first
turn on your VA-2080 is
1(SLOW)
. To change speed, just press and release the speed setting button(see
remote diagram on page 3). Speed level is indicated by number of beeping sounds, one beeping sound for
slow speed, two for medium speed and three for high speed.
D
D1
T (Training)MODE
Simply press and hold the Speed Button,you will hear a long beep indicating you are in T Mode now. T mode
allows you to learn how to operate your VA-2080 at a very slow speed. Also there are maximum and minim
height limits set to avoid crashing to ceiling or floor in T mode. To exit T mode just press the speed setting
button again.
