QUICK REFERENCE GUIDE
I.
Prior to installation, please ensure:
1.
The rated voltage of your firebox fits the output voltage of your outlet;
2.
The light bulbs in your firebox are in good condition. For checking this, please follow the
instructions for replacing the light bulbs on section MAINTENANCE.
II.
The heater on your fireplace may emit a slight, harmless odor when first used. This odor is a normal
condition caused by the initial heating of internal heater parts and will not occur again.
III.
If your heater does not emit heat, please ensure the Heater Switch is on. For further information,
please consult section Operation of the Practical User's Guide.
Marks
NOTE
Procedures and techniques, that are considered important enough to emphasize.
CAUTION
Procedures, which if not carefully followed, will result in damage to the equipment.
WARNING
Procedures, which if not carefully followed, will expose the user to the risk of serious injury, illness or
death.