Amano PR600 Series, Handling Manual

Page: 7 / 12

PR600 Handling Manual 5
Operation
1. How to Open the Case (Refer to Fig.
1, 2, 3, & 4).
•
Unfasten the hook [11] of the
case [2], and insert the master (K)
key into the key hole [3]. Turn the
(K) key clockwise to open the
case.
•
DO NOT push down, and/or hold
the upper case when turning the
(K) key, or the lock will not be
released.
2. How to Operate (Refer to Fig. 1, & 2).
•
Place the battery into the battery case [6], and ensure proper
placement by carefully checking the +/- battery sides.
•
Once the battery is inserted, the small lamp on the clock face will
light up indicating the clock is ready for operation.
3. How to Install the Roll Paper (Refer to Fig. 5, & 6).
•
Release the roll paper guide [9] as shown in Fig. 5, and install
the roll paper.
•
Insert the end of the roll paper into the slot of the paper tape
winder [7] as shown in Fig. 5, and turn the knob counter
clockwise (as shown in Fig. 6) so that the roll paper has suitable
tension.
Figure 4.
Figure 5.
Figure 6.