Amano PIX-3000x Series, Manual

Page: 18 / 24

14
PIX-3000x Options Manual
PIX Operation
When the PIX receives data from a PC, the liquid crystal display will go
blank and dashes will appear across the display until communications
with the PC are complete. If an error occurs during transmission, the top
row of day indicators will flash. During this error condition, all functions of
the PIX-3000x will continue to operate normally. If an error occurs during
communications, two actions can be taken to reset the display: Pressing
the reset button or using the PC to resend the time and date to the PIX
machines. A good transmission will clear the display.
PIX RS485 Hardware Specifications
The communication board is connected to the PIX using an 8 Pin
connector wire harness. The communication board itself is equipped with
an RJ11 (4C6P) connector that is used for the multi-drop system.
Connecting a single PIX or several PIX's to a system is done by using a
junction box and a line driver.