Entering the Clock Program
The following steps describe how to get into the clock program. To set
the print style and time, use a code chosen from the list.
1. To Enter the Code
a. Press and hold the
RESET
button on the bottom of the
clock. (Refer to Page 3 for location.)
b. While holding down the
RESET
button, press and hold
the
z
right button on the front panel.
c. While holding the
z
right button, release the
RESET
button.
d. When
Pro9
flashes in the display,
release the
z
right button.
e. Tap the
z
right button again. The
display will show 0000.
f. Tap the
W
left button until the first
number of your code appears, then
tap the
z
right button.
g. Tap the
W
left button until the second
number of your code appears, then
tap the
z
right button.
h. Tap the
W
left button until the third
number of your code appears, then
tap the
z
right button.
i. Tap the
W
left button until the fourth
number of your code appears, then
tap the
z
right button.
j. When the display flashes all four digits,
tap the
z
right button again.
k. When the display flashes
Pl ddA E
, tap
the
W
left button.
Amano Cincinnati, Inc.
(Mon. - Fri. 8:00 - 5:00 PST)
1-800-253-9836
Page 5
Summary of Contents for PIX-15
Page 1: ...User s Guide PIX 15 Electronic Time Recorder...
Page 11: ......
