Amano PIX-15, User Manual

Page: 5 / 12

Before You Change Any Settings
Take a moment to familiarize yourself with the items explained below.
The Front Panel
Normally, the Display Window shows the date and time. When you use
the Quick Set or Program Mode to change the settings of the PIX-15,
the instructions to change the clock are shown in this window.
The two buttons on the front panel are used to navigate through the
Quick Set and Program Mode to change the clock’s settings.
The left button is marked with a
W
symbol. It is called the
CHANGE Button . Use this button to change the information shown on
the display when you are in the Quick Set or Program Mode.
The right button is marked with a z symbol. It is called the
ENTER Button . When you are in the Quick Set or Program Mode,
use this button to enter the setting shown on the display into memory.
The Reset Button
The RESET Button (which is
shaped like a post) is located on
the bottom of the clock.
Please Note:
You do not need the key to set the time or to program the clock!!
You do need the key to change the ribbon or mount the clock on the
wall (See page 7).
If you have any questions, please call 1-800-253-9836.
Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836
Page 3