
8
WARNING!
Modifications or alterations to this machine
can lead to personal injury or damage to the machine.
DO
NOT
make unauthorized modifications or alterations
to this machine. Amano Pioneer Eclipse assumes
no liabilities for injury or damage resulting from an
unauthorized modification or alteration to the machine.
Any unauthorized modification or alteration to this
machine voids all warranties.
WARNING!
The muffler and the engine become hot
enough while the machine is in operation, and for a
long time after the machine is shut off, to cause severe
burns.
DO NOT
touch these parts of the machine until
they have cooled.
WARNING!
Injury can occur to the eyes and body while
using the machine. Safety goggles, safety shoes, and
safety clothing are recommended while operating the
machine.
WARNING!
Continuous exposure to high noise levels can
cause hearing loss. Hearing protection is recommended
while the machine is in operation.
WARNING!
Machine vibration may cause tingling
or numbness in the fingers or hands. Gloves are
recommended to reduce machine vibration. If tingling or
numbness persists, shut off the machine. If the vibration
is caused by loose parts, adjust or tighten these parts
before using the machine again.
CAUTION!
A dirty engine filter can cause overheating.
Check and replace following recommended maintenance
schedule.
CAUTION!
Overheating can be caused by insufficient or
low oil. Check oil before each use, and fill or change as
needed.
CAUTION!
Never over-fill engine with oil. Over-filling
could cause irreparable damage to the engine.
CAUTION!
Overheating can be caused by dirty oil. Check
oil before each use and change regularly following
recommended maintenance schedule.
CAUTION!
Do not engage starter for more than 5
seconds. Allow a 10 second cool-down period for
second failed start-up attempt.
CAUTION!
Perform all recommended scheduled
maintenance. Regular maintenance of your propane
powered floor machine is necessary to keep it in safe
working condition.
CAUTION! DO NOT
operate machine unless trained and
authorized.
DO NOT
operate machine unless you have
read and understand the operation manual.
DO NOT
operate machine in flammable or explosive areas.
CAUTION!
Before starting machine ensure all safety
devices are in place and functioning properly. Before
starting machine check for proper operation.
CAUTION!
When using machine, go slowly on inclines or
slippery surfaces. Use care when operating machine in
reverse.
CAUTION!
When servicing machine, stay clear of moving
parts.
DO NOT
wear loose clothing when working
on machine. Block machine wheels before raising or
jacking up machine. Use hoist stands that will support
the weight of the machine. Wear eye and ear protection
when using pressurized air or water. Disconnect
battery connections before servicing machine. Use only
replacement parts supplied by Amano Pioneer Eclipse
or a Amano Pioneer Eclipse Authorized Distributor or
Service Center.
CAUTION!
When loading or unloading machine onto or
off a truck or trailer, turn machine OFF. Only use a truck
or trailer that will support the weight of the machine
to transport.
DO NOT
push the machine onto or off a
truck or trailer unless the load height is 15 in (380mm)
or less from the ground. Block machine wheels when
transporting. Tie the machine down securely to truck or
trailer when transporting.
Summary of Contents for Pioneer Eclipse 300BU
