Amano American Sanders Super 7R 240V, Operator'S Manual

Page: 9 / 24

9
Safety Instructions
This floor-finishing machine shall be grounded while in
use to protect the operator from electrical shock. The
machine is provided with a three-conductor cord and
a three contact grounding attachment plug to fit the
proper grounding type receptacle. The green (or green
and yellow) conductor in the cord is the grounding wire.
Never connect this wire to other than the grounding pin
of the attachment plug.
This machine is for use on a nominal 230 volt circuit
and has a grounding plug that resembles the plug
illustrated as (A) in the sketch. Make sure that the
machine is connected to an outlet having the same
configuration as the plug. No adapter should be used
with this machine.
Model Super 7R Super 7R
Model Number 07098A 07099A
Voltage / Frequency 230V / 50Hz 230V / 50Hz
Amperage (A) 6 6
Motor
0.75 kW
750 Watts
0.75 kW
750 Watts
Abrasive Size 7” X 7/8” Disc 7” X 7/8” Disc
Disc Rate 2800 2800
Disc Driver System Gear Driven Gear Driven
Power Cable H05V/F3G 1.0mm sq X 15.4m H05V/F3G 1.5mm sq X 15.4m
Dust Collection Standard Standard
Dust Control Rate 110 CFM 110 CFM
Machine Specifications