29
I N S T A L L A T I O N
E N
5.2
Inserting a floor plate
▷
Insert the floor plate.
Fig. 7
5.3
Electrical connection
The electrical connection is to be made via a
socket outlet with earthing contact providing
220 - 240 V and 50 - 60 Hz. This socket outlet
must be located close to the furnace and be easily
accessible.
When using an extension cord or a multiple socket
outlet, do not exceed the respective max. electri-
cal load rating.
▷
Set the mains switch to the
0
position.
▷
Connect the enclosed mains cable to the socket
intended for this purpose on the rear of the fur-
nace.
Fig. 8
▷
Connect the other end of the cable to the socket
outlet with earthing contact.
WARNING:
The mains cable may not be damaged!
▷
Do not place objects on the mains cable.
▷
Lay the mains cable in such a manner that
nobody can step on or trip over it.
▷
Pay attention that the cable does not have
contact with hot objects or surfaces.
▷
In case of damage to the insulation: Replace
the mains cable.
NOTE:
Do not insert the mains plug before the heating
elements have been inserted.
The mains cable may only be replaced
against an original mains cable from the
manufacturer.
