34
A P P L I C A T I O N A N D O P E R A T I O N
E N
5.3
Starting-up the milling machine
5.3.1
Machine
▷
Switch the milling machine on via the main
switch.
The milling machine runs through an automatic
sequence via the screen for entering the basic
settings:
▪
Basic settings network connection
▪
Referencing axis system
▪
Filling tank and flushing coolant circuit
▪
Inserting swarf sieve
▪
Inserting tools
▷
Follow the instructions on the screen.
All settings can also be entered or changed later
via the menu.
6
Application and Operation
6.1
Symbols on the buttons
WARNING:
Danger from shavings/chips or tool fragments
being thrown from the machine!
▷
Make sure that the door of the milling
machine is always closed during processing!
The water for the coolant/lubricant must
have drinking-water quality. The optimal
hardness range is between 10 - 20
°
dH
(corresponds to 1.8 - 3.6 mmol total hard-
ness per litre). If the hardness is far
beyond this range, we recommend the
addition of distilled water. For grinding
glass-ceramic materials, it is generally rec-
ommended to use distilled water.
Symbol
Designation
Where?
Tools
Start screen
Machine
Settings
Messages
Opening/closing the
door of the milling
chamber
Varies
Diameter, tool insert
Tool over-
view
Tool wear
Tab. 2
