47
I N S T A L L A T I O N
E N
5.6
Inserting the sintering base
▷
Insert the ceramic tube.
▷
Insert the floor plate.
Fig. 12
▷
Unscrew the six screws on the rear of the fur-
nace and remove the back panel.
Fig. 13
▷
Thread the hose piece of the sintering base
through the hole of the rear wall and slide the
sintering base to the stop into the furnace; if
required, apply a light jiggling motion.
The hose piece must completely project out of
the rear side of the furnace.
Fig. 14
NOTE:
The tube can easily break when being bent.
▷
When mounting together, make sure to firmly
hold the sintering base by the connecting port.
Summary of Contents for 178740-STM
Page 1: ...Argotherm _ Betriebsanleitung _ User Manual _ Deutsch 3 33 _ English 34 65...
Page 2: ......
Page 66: ...66...
Page 67: ......
