13
An authorized servicer must inspect equipment
annually. Record all inspections and repairs for future
reference.
Changing Oven Light Bulb
Tools and Bulb
• Protective gloves
• Standard screwdriver or ¼-inch socket
• Light bulb rated 230 volt, 25 watt
1. Unplug oven.
2. Remove screw from back of oven and remove
access cover.
• See figure below.
3. Remove bulb by turning counterclockwise, being
careful not to burn fingers or break bulb.
• Replace with bulb rated 230 volt, 25 watt.
4. Plug in oven.
A
A—Light bulb access cover
Care and Cleaning
Caution
To avoid electrical shock hazard unplug power cord
or open circuit breaker to microwave oven before
replacing light bulb. After replacing light bulb,
reconnect power.
Caution
To avoid burns and cuts, wear gloves to protect
hands should bulb break. If hot, allow bulb to cool.
Microwave Utensils
Utensil Check Test
Use the following test to check utensils for microwave
safeness.
1.
Place glass measuring cup of water next to
empty dish to be tested in microwave oven.
2.
Heat on full power for one minute.
3.
Check temperature of dish and water.
• If dish remains cool and water is hot, dish is
microwave safe.
• If dish is slightly warm, use for short term cooking
only.
• If dish is hot and water is cool, do not use. Dish
remains cool if not absorbing microwaves and
microwaves are being absorbed by water. Dish
becomes hot if absorbing microwaves.
Recommended
Not Recommended
Glass/ceramic
Aluminum foil
Natural fiber cloth
Grocery bags
Non-recycled paper
Recycled paper
Plastic
Lead crystal
Wood
Newspapers
Metal
Metallic trimmed china
