4
Procedure
Caution
To avoid personal injury or property damage,
two people should remove and rehang each
door.
Caution
To avoid personal injury, protect hands and
arms. Trim pieces may have sharp edges.
Important
Save all screws and reuse in original location.
1. Remove top handle end caps by removing screws.
2. Dispenser Models
Remove crushed/cubed ice switch cover on
dispenser by pulling forward. Remove screws from
bottom of dispenser cover. Release bottom clips on
dispenser cover by placing taped edge of putty knife
underneath cover and pulling out. Release top clips
by holding bottom of dispenser cover out and slide
upward.
3. Remove door handle inserts by placing screwdriver
at top of door handles in area between handle and
insert and pulling out.
4. Pull edge of inserts forward along length of handles.
Caution
To avoid personal injury or property damage,
hold handles when removing.
5. Remove door handles by removing screws. Bottom
inserts are removed with handle.
6. Remove top door trim by removing screws.
7. If refrigerator has decorator panels, carefully slide
panels out. On dispenser models, remove
dispenser trim.
