15
Boosted Hot
Approximately 140° F
•
Sturdy
whites
and
colorfast items
•
Work
Clothes
•
Heavily
soiled
items
•
Diapers
Hot
Approximately 120° F
(Or as determined by home
hot water supply)
•
Sturdy
whites
and
colorfast items
•
Work
clothes
•
Soiled
items
•
Diapers
Warm
Approximately 100° F
•
Light and moderately
soiled items
•
Non-colorfast or dark
colors.
•
Permanent
press
•
Silks, woolens, nylon,
acrylic
•
Rinsing of some items
Cold
Approximately 65° F
•
Non-colorfast items
•
Extra delicate clothing
•
Rinsing of most items
Boosted Hot Wash
Boosted Hot Wash will boost water temperature in
tub to 140° F and is useful for improved cleaning of
some loads. “Heater On” light will be on when the
heating element is on. Timer will not advance until
140°F has been reached. Time needed to reach this
temperature may add an additional 30 to 60 minutes
to the cycle time. Hot water is the most effective for
cleaning but it is not recommended for all fabric types
(read labels).
NOTE: Boosted Hot Wash can be turned off by rotating
the WASH/RINSE temperature to another
setting. (The washer may pause for a short time
when this change is made.)
NOTE: There will be extended pauses with tumbling
action when BOOSTED HOT WASH is selected
because water is being heated.
6.
Select “EXTRA RINSE” if desired.
Extra Rinse control is useful for people with detergent
sensitive skin. By pressing the “Extra Rinse” to “ON”,
the Regular, Permanent Press/Knits, or Delicate
cycles will each provide an additional rinse. When
extra rinse is not wanted, “OFF” should be selected.
Extra Rinse will add approximately 10 to 15 minutes
to the total cycle time.
• Extra Rinse is useful for removing detergent for
sensitive skin.
Extra rinse button
7.
Select cycle according to type of fabric being
washed. Push timer knob in and turn clockwise to
desired cycle and wash time. Use indicator dot on
knob as a guide.
Cycle knob
8.
Pull timer knob out to start washer. “DOOR
LOCKED” light will come on after a short delay, water
fill will begin, and wash tub will begin tumbling.
NOTE: Washer door MUST be closed tightly to start
washer.
Adding Items during wash cycle
If adding items after a cycle has already started perform
the following steps:
• Push timer knob in. There will be approximately a
minute delay as “Door Locked” light goes out.
• Open door and add or remove items.
• Adjust timer knob (if desired) and pull timer knob back
out to restart cycle.
Operating Washer
Summary of Contents for Front Loading Washers
Page 23: ......
