Amana Electric Slide-in Range, Installation Instructions Manual, Page: 3 / 6

POSITION AND
LEVEL RANGE
Place range near final position and
plug in. Then, slide range into final
position and adjust all legs (4) until
range is level side to side and front
to back.
• Place a level on top oven rack or
on range top when leveling.
• Leveling legs must extend ¼ inch
to engage anti-tip bracket.
3
Removal and Replacement of Range
1. Disconnect power to range.
2. Slide range forward.
3. Unplug range cord and place range aside.
4. Remove anti-tip bracket.
5. Install anti-tip bracket into new location using instructions provided
with bracket or see Anti-tip Bracket installation
section in this manual.
6. To reinstall range, follow instructions in this manual.
Remove
Storage
Drawer and
Check Anti-tip
Bracket
After range is in position,
remove storage drawer and confirm
anti-tip bracket is engaged with range
leveling leg.
To remove storage drawer
1.
Slide drawer out until it stops.
2. Grasp drawer sides near back of
drawer.
3. Lift up and out. Reverse to
reinstall.
Questions?
See Owner’s Manual or call Amana
Consumer Affairs Department
1-800-843-0304
To avoid damaging oven door
or rangetop, DO NOT lift or
move range by grasping
rangetop or oven door handle.
Oven door glass can break.