9
DP01* or DL01E
Entering Room Number
(Skip if not using DP01* Front Desk Platform)
1. The PTAC control can be set for a 4-digit room number. To select the first two digits (floor), press the HEAT
key until
appears, then press the up
down arrows to select the first two digits.
2. To select the last two digits of the room number, press the HEAT
key until
appears, then press the up
and down
arrows to select the last 2 digits of the room number.
For example for Room “201”, press the HEAT
key until
appears, then press the up
down arrows
to select “02”:
=
.
Next to select the last two digits of the room number, press the HEAT
key until
appears, then press
the up and down
arrows to select “01”:
=
.
3. If a room contains more than one unit (a suite), a suffix must also be entered to identify which unit is in the main
room and which unit(s) are in bedroom(s). Master unit ALWAYS MUST have a 01 suffix and slaves a suffix or 02, 03,
etc. To select the room # suffix, while still in configuration mode, press the HEAT
key until
appears.
Then press the up and down
arrows to select the room # suffix. Example: For the unit serving the main living
area in room 224, press the HEAT
key until
appears, then press the up and down
arrow keys to
select
(
=
appears in the display).
For the bedroom unit closest to the main room in room 224, press the up and down
arrow keys to select 02
(
=
appears in the display) Press the
key to exit configuration mode.
