Amana BigOven ACF7225A Owner'S Manual Download Page 13

13

Using the Oven Control 

(cont’d)

Preheating

In most cases, you should preheat the
oven before baking.  After the
temperature knob is turned, the oven
temperature will begin to rise until the
desired cooking  temperature is reached.
When cooking temperature is reached
oven signal beeps.

WARNING

!

To avoid risk of personal injury,

property damage or fire, do not

line oven bottom, racks, or

broiler pan and grid with

aluminum foil.

WARNING

!

To avoid risk of personal injury,

property damage or fire, never

leave oven unattended while

broiling.

Broiling

Broiling sears in natural juices and provides charbroiled flavor.
To broil, center food on broiling grid and pan and place on proper rack in

oven. Do not place aluminum foil over boiling pan, oven rack or oven

bottom. 

Oven door must be fully closed.

 Broiling does not require

preheating so you can place food in oven while it is still cool.
Convection fan cannot be used during a broil cycle.
1. Adjust oven racks to desired position.

2. Turn oven temperature knob to BROIL.

• Oven indicator light will turn on and

remain on.

•

BRL

 will display.

• Display will return to time of day

approximately 15 seconds after

broiling begins.

2.

Close oven door.

• If oven door is ajar for more than

3 minutes, broil cycle will stop.

• If broil cycle stops because the door was open too long, close oven

door and broil cycle will continue.

3. After broiling, remove food and turn oven temperature knob to OFF.

Baking  or  Convection  Baking

While oven is still cool, remove any stored items from the oven cavity.
1. Place racks in desired position and close oven door.

2. Push and turn oven temperature knob to desired temperature.

• Oven indicator light will turn on and stay on.

• For convection baking, press

CONVECTION pad. Indicator light will

glow in convection mode.

• Convection baking will take less time.

Check food frequently.

• Temperature is displayed in the clock

area in 5 degree increments.

• Temperature range is 170 °F to 550 °F

• Display will return to time of day after

approximately 15 seconds.

• To recall oven temperature, press

RECALL OVEN TEMP/CLOCK pad.

3. PREHEAT light will turn on during the preheat cycle. PREHEAT light

shuts off when oven has reached desired temperature and oven beeps.

4. Open door carefully and place food in oven.

5. After cooking time elapses, remove food and turn oven temperature

knob to OFF.

Preheat  Signal

After setting oven to bake and selecting
a temperature, oven preheats.  When
oven reaches set temperature, signal
sounds. The preheat light will shut off
and remain off after oven has reached
the selected temperature.

How High or Low Can I

Set the Temperature?

Oven bake temperature can be set from
170 °F to 550 °F . Some minor smoking
is normal when using oven for first time.

Summary of Contents for BigOven ACF7225A

































Reviews: