12
Using the Oven Control
Setting Electronic Clock
The 12 hour clock does not display
AM
,
PM
or military time. When power
is connected or restored, display flashes until
RECALL OVEN TEMP/CLOCK pad is pressed or
temperature knob is turned.
1. Press RECALL OVEN TEMP/CLOCK pad.
2. Press
+
or pads until correct time-of-day
displays.
3. Time is locked in after 5 seconds of no adjustment.
Setting Minute Timer
The timer is a timer only. Electronic timer does not control bake, broil or
self-clean function. Timer can be set up to 11 hours and 59 minutes.
1. Press TIMER ON/OFF pad.
2. Press
+
or pad until desired amount of time displays.
Time increases in 1 minute and 10 minute
increments.
Timer begins counting down automatically
after time is entered.
To view clock while timer counts down,
press RECALL OVEN TEMP/CLOCK pad.
Timer will return after 3 seconds of no
input.
3. Press and hold TIMER ON/OFF pad to cancel timer signal.
After time elapses, timer beeps a single, three second tone.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER ON/OFF pad, then
+
or pad until new time displays.
To cancel timer when remaining time is displayed or when signal is
beeping, press and hold TIMER ON/OFF pad.
Flashing Display
When power is connected
or interrupted, oven display flashes.
Press CLOCK to reset display.
Clock may need to be reset.
Making the Numbers
Increase at a Faster Rate
Time increases in larger increments
the longer the
+
or
pad is held.
Timer Signal
When time elapses, tone will sound.
Press TIMER ON/OFF pad to stop timer
and return to clock display.