
9
RS5280001 Rev. 0
Owner's Manual
Procedure
1.
Remove plastic cap from water valve inlet port.
B
A
A. Water valve inlet port
B. Plastic cap
Cap removal
2.
Place brass nut and brass sleeve on copper tubing
(Brass nut and sleeve are found in literature
packet). Insert copper tubing into water valve inlet
port. Connect brass nut on copper tubing to water
valve inlet port. Start connection by hand then use
a
1
/
2
" (13 mm) open end wrench. Make sure copper
tubing is secure by pulling on copper tubing.
A
B
C
D
E
A. “P” clamp
B. Copper Tubing
C. Brass sleeve
D. Brass nut
E. Water valve inlet port
Connect ice maker water supply line
3.
Turn on water supply to refrigerator and check for
leaks. Correct any leaks at connection. Be careful
not to overtighten connection.
4.
Create a service loop using extreme care to avoid
kinks. Secure copper tubing to refrigerator cabinet
with a “P” clamp.
5.
Proceed to
Leveling Refrigerator
for final
refrigerator placement.
6.
Review
Installation Checklist
in Owner’s Manual
with consumer.
Controls
This refrigerator operates at household temperatures of
55° to 110°F (13° to 43°C).
Fresh Food and Deepfreeze
®
Controls
Fresh Food and Deepfreeze
®
controls are located on
center divider between Fresh Food and Deepfreeze
®
sections.
When Deepfreeze
®
control is set to
OFF
, neither Fresh
Food nor Deepfreeze
®
sections will cool. Initially, set
both controls to
4
. Wait 24 hours for Fresh Food and
Deepfreeze
®
sections to reach desired temperatures.
After 24 hours, adjust controls, one number at a time, as
desired. 1 is warmest setting and 7 is coldest.
Setting Controls
Set controls precisely with a household thermometer that
includes temperatures between -5° to 50°F
(-21° to 10°C).
Put thermometer snugly between frozen packages in
Deepfreeze
®
section. Wait 5-8 hours. If Deepfreeze
®
temperature is not 0° to 2°F (-17° to -16°C), adjust
control, 1 number at a time. Check again after 5-8 hours.
Put thermometer in a glass of water in middle of Fresh
Food section. Wait 5-8 hours. If Fresh Food temperature
is not 38° to 40°F (3° to 4°C), adjust control, 1 number at
a time. Check again after 5-8 hours.
Exterior Moisture Control
Exterior Moisture Control is located on center divider
between Fresh Food and Deepfreeze
®
sections.
In humid conditions, refrigerators form condensation
around doors. Special heaters in refrigerator cabinet
minimize condensation.
Humidity depends on location of refrigerator. Set control
to
ON
if refrigerator is in a humid area or whenever
moisture is evident around doors. Set control to
OFF
if
refrigerator is in a less humid area. Setting can be
adjusted as conditions change.
High quality steel is used in this refrigerator. However,
constant exposure to moisture may cause refrigerator
cabinet to rust. Set control to
ON
anytime condensation
forms on refrigerator cabinet.