7
English
Install Limitations
•
Do not install your refrigerator in any location not properly insulated or heated
e.g. garage etc. Your refrigerator was not designed to operate in temperature
settings below 55˚ Fahrenheit.
• Select a suitable location for the refrigerator on a hard even surface away from
direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc. Any floor unevenness should be corrected with the leveling legs
located on the front bottom corners of the refrigerator.
Door Alignment
(see fig. 1)
1. Remove hinge cover screw.
2. Remove top hinge cover.
3. Loosen the top hinge screws using a phillips head screwdriver.
4. Adust the door and then tighten the screws.
5. Replace the top hinge cover.
Reversing the Door Swing
(see fig. 1 to fig. 4)
Left/right door opening method:
This product provides the reversing of the left/right door opening. You can select
your preference of door opening by following the procedure to make the change.
fig. 1
hinge cover
top hinge
Ajustando o retirando el estante deslizable:
(ver fig. # 17) (HTE Series)
1. Sostenga el estante y deslice el mismo hacia delante hasta trabe.
2. Para colocar nuevamente el estante del freezer inserte y empuje el
mismo dentro de los soportes laterales izquierdos.
3. Para retirar simplemente levante y tire hacia fuera del compartimento
del freezer.
Creación de hielo:
(series HTE solamente)
• Su refrigerador está equipado para la instalación de un kit para hacer
hielo si lo desea. Usted puede instalar un kit HAIER HI1MK. Para mayor
información llame al 1-800-461-8890/ 3100
Caracteristicas del Freezer
fig. 17
Español
14
