7
Installing Side Trim
See Figure 5. If desired, optional side trim provided can be
installed on range. Side trim must be installed above counter
top level and tapped down into place.
Side trim can be mounted in several different positions
depending on counter top opening, cabinet structure, and
range features.
Freestanding with Backsplash
To mount trim flush with front of counter top, use #3 trim
holes and “A” range holes.
4-inch Backrail Kit and Backsplash
To mount trim flush with front of counter top, use #3 trim
holes and “A” range holes.
Optional Mounting
“A” range holes allow an extra
3
/
8
-inch forward
adjustment. Trim holes #1, #2, and #3 allow a
1
/
2
-inch
adjustment. Trim can be mounted in any desired location
using holes provided.
Figure 5
Roll Formed Countertop
See Figure 6.
A
B
A—If the countertop is roll formed, notch the
countertop to allow for overlapping trim.
B—Side trim
Figure 6
Minimum Clearances to Combustible
Surfaces
See Figure 4. Using dimensions, prepare cabinet
opening.
• Minimum clearance to rear wall is 0 inches.
• Minimum clearance to a vertical right or left side wall is
0 inches.
• Minimum clearance to countertop/cabinet on each side
is 0 inches.
• Minimum of 30 inches between top of cooking surface
and bottom of an unprotected wood or metal cabinet.
• Minimum of 24 inches between cooking surface and
protected wood or metal cabinet above range. Cabinet
bottom must be protected by at least ¼ inch thick
millboard with not less than No. 28 MSG sheet steel,
.015 inch thick stainless steel, .024 inch thick
aluminum, or .020 inch thick copper.
A
B
C
D
E
A—30 inches minimum
B—30 inches unprotected/24 inches protected
minimum
C—13 inches maximum
D—3 inches minimum (Both Sides)
E—18 inches minimum
Figure 4
