PRODUCT IDENTIFICATION
12
MODEL #
MFG #
DESCRIPTION
DCVK-20
(CVENT-2)
DCVK-30
(CVENT-3)
N/A
Concentric Vent Kit
. This kit is designed to allow terminations of a direct vent furnace
to be "concentrically" vented through a wall or roof. This kit allows a single penetration
to support terminations for both the vent/flue and the com bustion air intak
EFR02
N/A
External Filter Rack Kit
. For use with 34.5" up flow gas furnaces. This kit is intended to
provide a location, external to the furnace casing for installation of a permanent filter.
The rack is mounted over the indoor air blower compartment area of either
0170K00000S
N/A
Side Wall Only Concentric Vent Kit
.
This kit is to be used with 2" - 3" vent systems.
The vent kit must terminate outside the structure. This kit is NOT intended for use with
single pipe (indirect vent) installations.
0170K00001S
N/A
Side Wall Only Concentric Vent Kit
. This kit is to be used with 2" vent systems. The
vent kit m ust terminate outside the structure. This kit is NOT intended for use with
single pipe (indirect vent) installation
LPLP03
N/A
LP Gas Low Pressure Kit
. Designed for use with furnaces converted to LP gas. The kit
m onitors gas line pressure with a pressure switch and will open the circuit to the gas
valve if the LP tank pressure gets low.
LPM-07
N/A
LP Conversion Kit
Converts a 34.5" single stage furnace to operate on L.P. gas. The
kit contains an L.P. gas valve and a set of six L.P. orifices.
RF000142
N/A
Drain Coupling Kit
For use when the drain/vent elbow has been rem oved in a
horizontal left installation. This kit prevents condensate from getting in the inducer and
routes the condensate to a drain. This kit can also be used on the furnace combustion
air inlet to catch condensate.