5.29
Data polarity
Display:
dAtA POL
Range:
Hi
or
Lo
Default Value:
Hi
Data polarity - Allows selection of active low (
Lo
) or active high (
Hi
) data inputs.
5.30
Strobe polarity
Display:
Strb POL
Range:
Hi
or
Lo
Default Value:
Hi
Strobe polarity - Allows selection of active low (
Lo
) or active high (
Hi
) strobe inputs.
5.31
BCD code
Display:
bcd COdE
Range:
0
to
5
Default Value:
0
BCD code - BCD inputs only i.e. bcd selected at
SEt INPt
function - allows selection of special
code characters as shown below.
Select the format for non BCD digits, A to F (hexadecimal):
0
- A to F (1010 to 1111) displays blanks
1
- A to F (1010 to 1111) displays
A
,
b
,
C
,
d
,
E
,
F
2
- A to F (1010 to 1111) displays
-
,
C
,
1
,
"
,
o
, blank
3
- A to F (1010 to 1111) displays
A
,
L
,
H
,
I
,
o
, blank
4
- A to F (1010 to 1111) displays
"
,
C
,
F
,
~
,
-
,
_
5
- A to F (1010 to 1111) displays
-
,
E
,
H
,
L
,
P
, blank
5.32
Number of BCD digits to be displayed
Display:
bcd dIGt
Range:
1
to number of display digits on the instrument
Default Value:
4
Number of BCD digits (1 to number of display digits on the instrument) - BCD inputs only i.e.
bcd
selected at
SEt INPt
function - allows selection of the number of BCD digits to be displayed.
The setting allows unused digits to be ignored and thereby prevent unwanted display characters
appearing when the
bcd COdE
function is set to a value other than
0
.
PM4BCMAN-2.0-0
31 of
Summary of Contents for PM4-BC
