Vipros 357 Queen with Fanuc 18PC User Pre-installation Guide
©Amada America, Inc.
Print Date 01/24/2001 Revision 4.0
This document available on the World Wide Web at http://www.amada.com
Page 11 of 37
Installing the Electrical Power Supply
The Vipros 357 Queen requires two separate electrical power sources. The first power source is supplied to the Fanuc 18PC.
The other power source goes to the SBC EX 5.5 Chiller. The Vipros 357 Queen should be supplied from a power line
separate from those for welding machines or other machines that produce electrical noise.
!
The Vipros 357 Queen electrical inlet is 64" above floor level at the rear of the Fanuc 18PC control.
!
The SBC EX 5.5 Chiller electrical inlet is approximately 53" above floor level.
!
For the location of required electrical supplies for optional equipment, please see the installation guides for the specific
equipment.
Vipros 357 Queen rear of electrical enclosure
SBC EX 5.5 Chiller electrical enclosure
