A M A C O M
B
A
B
Y C D R W
A M A C O M
B A B Y C D R W
7
When you unpack your BABY CDRW drive you should check the contents of the box against the list
below. In the event that you are missing any of the items you should contact Amacom as soon as possible
using one of the methods in the “Contacting Amacom” section of this manual.
U N P A C K I N G T H E
B A B Y C D R W
BABY CDRW Drive
Mains Cable
Roxio Easy CD Creator Basic (PC Only)
Roxio Toast Lite (Mac OS Only)
User Manual & Drivers CD
1 x Blank CD-R Disc
1 x Blank CD-RW Disc
Warranty Card
Once you have unpacked the contents of the box please continue to the “Setting Up The Hardware”
section of this manual and follow the instructions to setup your new BABY CDRW drives hardware.
Setting Up The Hardware
1.
Place the BABY CDRW drive on a flat, stable surface and away from the desk edge.
2.
Attach the mains cable to the rear of the BABY CDRW.
3.
Plug the mains cable into the wall socket and turn the wall socket switch on.
4.
Attach the interface cable supplied to the interface port on the rear of the BABY CDRW drive,
ensuring that it is pushed on firmly to prevent a loose connection.
Your hardware is now setup and you should consult the “Device Driver Installation” section of this manual
that is relevant to your chosen interface and operating system.
S E T T I N G U P T H E H A R D W A R E
Summary of Contents for Baby CDRW
Page 2: ...A M A C O M B A B Y C D R W 2...
Page 14: ...A M A C O M B A B Y C D R W 14...
