AMT5500 User Manual
34
4.1.3. Profile Management
To add a Network Profile for the first time:
The initial Default Network Profile (CID1) has been created. If you are using
the Wireless Router for the first time, you can proceed with the procedure below in the
CID1 Profile name.
1. In the Profile Management field, Check Profile name is
CID1(default).
2. Set the profile-associated parameters.
3. Click
Apply
.
To add a Network Profile:
You can add a new Network Profile by below creating procedure.
1. In the Profile Management field, Click
New Profile
.
2. Set the profile-associated parameters.
3. Click
Apply
.
To Set the Default Network Profile:
After you set the default profile, the Wireless Router accesses the Internet via the
default mobile network provider's network.
1. In the Profile Management field, select
Profile name
drop-down list.
2. Select a network profile.
3. Click
Apply
.
4.1.4. Random NW Attach
The Random NW Attach function reduces the load on the network by randomly
distributing the time to attach to the network for up to 10 seconds when restarting. When
set to Disable, the function is canceled and is applied from the next restart.
1. In the
Random NW Attach
field, select.
Enable (default):
Enable Random NW Attach.
Disable:
Disable Random NW Attach.
2. Click
Apply
.
After clicking Apply, the router restarts.
