AM.PM PRIDE F7P00000, Manual

Page: 6 / 28

1. Disconnect hot and cold water supply
system. Screw in eccentric adapters to the
outlets of the water supply pipelines having
material. Adjust the location of the eccentric
adaptors so that they match together and
correspond to the mixer connecting position,
herewith mixer position should be horizontal
(distance between eccentric centers –
150mm).
2. Remove (screw loose) aerator of bath/
shower mixer (to avoid aerator clogging
3. Install wall plates onto the eccentric
adaptors using a tool with soft coating (to
avoid damage of mixer nuts decorative
cover), connect mixer housing.
4. Switch on water supply system. Once
mixer is in the closed position check all
connections for leakproofness. When
necessary arrange additional tightening and
sealing of connections.
5. Connect shower hose and hand shower.
6. Open cold and hot water supply through
afterwards close water supply and install
(screw tight) aerator.
MIXER INSTALLATION
000 F7 00000
DE
MONTAGEANLEITUNG MISCHBATTERIE
KÜCHENMISCHER , WASCHTISCHMISCHER, BIDETMISCHER(MONTAGE AUF
WAAGERECHTEN OBERFLÄCHEN)
F7Р03000
F7 02100 / F7 82100 F7 83100
6