alzaTools AT-CBCS20V, User Manual

Page: 14 / 72

14 ENGLISH
with your hands.
SETTING THE BASE OF THE CUTTING SAW BEVEL
The adjustable saw base allows you to make mitre cuts at angles from 0° to 45°.
• Release the basic position locking lever (17) (Fig. J).
• Use the scale to set the base (16) to the desired angle (from 0° to 45°).
• Secure the base position locking lever (17).
Remember that when cutting a bevel, the risk of recoil is greater (jamming is more likely), so it is espe-
cially important that the base of the saw rests on the entire surface area of the material.
Make the cut in a smooth motion.
CUTTING INTO THE MATERIAL
• Set the desired depth of cut that corresponds to the thickness of the material to be cut.
Remove the battery from the device before beginning any installation, adjustment, repair, or main-
tenance activity.
OPERATION