16
How to insert the batteries: Use a screwdriver to loosen the
screw on the back of the remote control, open the battery
cover, and install two AA 1.5V alkaline type batteries
according to the diagram, then close the battery cover and
fix with a screw.
How to remove batteries: Use a screwdriver to loosen the screw on the back of the
remote control, open the battery cover and remove batteries, then close the battery
cover and fix with a screw.
Warning:
•
Non-rechargeable batteries are not to be charger.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the toy.
•
Rechargeable batteries are only to be charged under adult supervision.
•
Rechargeable batteries are to b removed from the toy before being charged.
Charging
For safety purpose, the charging must be done by adults. When it is the first time to use,
open the engine bonnet, remove the engine plastic cover, connect two red clip locks of
two wires. Please charge for 8 to 12 hours.
If the car has slowed down, it needs to be charged for 8 to 12 hours, maximum of 20
hours.
First, insert the plug of the charger into the charging port. The car power will be cut off.
Then insert the charger to the power socket.
