12
3. Search coil is not parallel with
the ground.
3. Adjust the search coil
angel to be parallel with
the ground.
LCD display multiple
target categories or
emits several sounds
at once.
1. There may be over one kind
of metal targets.
2. The detector cannot identify
the target. Sometimes, oxidized
metal also causes the excursion
of target arrow and tone.
1. Reduce the sensitivity to
eliminate the detection of
the deeper target.
2. Sweep the search coil
with different angles.
The detector does
not function.
1. Five-pin cable not connected
well.
2. Dead battery.
1. Re-pug it properly.
2. Replace batteries.
Factors That Affect the Detecting
It is difficult to have an accurate detecting result. Sometimes the detecting may be
restricted by some factors.
•
The angle of the target buried in the soil.
•
The depth of the target.
•
The level of oxidization of the target.
•
The size of the target.
•
Electro-magnetic and electrical interference surrounding the target. If you detect
patiently and correctly and practise more times, you will ger satisfactory result.
Care and maintenance
Your metal detector is an example of superior design and Craftsmanship. The following
suggestions will help you care for your metal detector so you can enjoy it for years.
Handle the detector gently and carefully. Dropping it can damage circuit boards and
cases and can cause the detector to work improperly.
Use the detector only in normal temperature environments. Temperature extremes can
shorten the life of electronic devices damage the cases of the detector.
Wipe the detector with a damp cloth occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong detergents to clean the detector.
Keep the detector away from dust and dirt, which can cause premature wear of parts.
