4
Parts of the detector
Preparation
Assembling the detector
Assembling your detector is easy and requires no special tools. Just follow these steps.
1) Unscrew the fixing knob on the search coil and remove the knobs and the connector.
Insert the smaller stem and align the holes on the search coil bracket and the stem.
Push the connector through the holes and tighten the knob.
2) Loosen the stem’s lock nut (connected with the handle) in the direction of the arrow.
Then insert the smaller stem into the big stem connected with the handle. Turn the
stem’s lock nut in the reserve direction of the arrow to lock it in place.
Control Box
Arm Rest
Adjustable
Stem with
Cable
Search Coil
Lock nut
