5
Installing batteries
1) Turn off the power before installing the batteries.
2) Slide the left and right battery covers off in the direction of the arrow.
3) Place two 9V batteries into the battery compartment matching the polarity symbols (+
and -) marked inside.
WARNING:
Dispose of old batteries promptly and properly. Never bury or burn them.
CAUTIONS:
•
Use only fresh alkaline batteries of required size.
•
Do not mix the old and new batteries of different types of batteries.
•
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries.
•
If you do not plan to use the unit for a week or more time, remove the batteries.
Batteries can leak chemicals that can destroy electronic parts.
•
Change the batteries if the battery indicator on the LCD lights.
Using Headphones
1) It is recommended to choose the headphones with volume control.
2) Insert the headphones’ 3.5mm plug into the PHONE jack. At this time the internal
speaker disconnects.
3) Set the VOLUME to the desired level.
LISTENING SAFETY:
•
To protect your hearing, set the volume to the lowest setting before you begin
listening, adjust the volume to a comfortable level.
•
Do not listen at extremely high volume levels. Extended high volume listening can
lead to permanent hearing loss.
•
Do not wear headphones while operating your detector near high-traffic areas.
Pay attention to traffic safety.
