1. 10W COB LED
2. LENS
3.
SWITCH
4.
CHARGER SOCKET
5.
POWER INDICATOR
6.
USB POWER OUTPUT
7.
TRANSPARENT COVER
8.
FIRM HANDLE
9.
MAGNETS
10.
CHARGER
WARNING
This device utilizes rechargeable Lithium ion battery that can be ruptured, ignited and cause series of
injury if wrong usage. Read the following safety rules:
DO NOT place battery and device in fire or high temperature
DO NOT tamper with battery wiring
DO NOT puncture or damage battery
DO NOT use battery that appears damaged
DO NOT immerse or expose battery to water
DO NOT alter or modify the battery
DO NOT attempt changing the battery in any manner other than that prescribed in this manual.
DO NOT dispose of the battery in fire or water.
Failure to notice this warning may result in personal injury and/or property loss.
CAUTION: Never point at people’s eyes directly with LED light.
Please read manual carefully use product correctly and safe.
Assembly and use
1, charging
Connect the charger into charging socket, which is located on the rear of work light.
Connect the charger to a power supply.
The charging indicator will illuminate to show the charging has started.
Disconnect the charger from the work light when it has been charged for a sufficient time.
2, operating the lamp
CAUTION: Never point at people’s eyes directly with LED light.
Choose the desired working mode with switch
：
100%-50%-SOS-FLASH-OFF
Under each mode you can off the lamp after 5 seconds illumination.
Specifications
：
：
：
：
Charging time
：
：
：
：
4-5hours
Working time
：
：
：
：
3hours
（
（
（
（
100%
）
）
）
）
6hours
（
（
（
（
50%
）
）
）
）
Luminous Max
：
：
：
：
800lm
Battery
：
：
：
：
3.7V 4400mAh
10
