10.
Hook
11.
10W COB LED
12.
Magnetic (back)
13.
Indicator
14.
Switch
15.
3W Torch
16.
Charging socket
17.
Magnetic (bottom
）
）
）
）
18.
Mirco USB cable
Warning
This device utilizes rechargeable Lithium ion battery that can rupture, ignite and cause series injury if missed
usage. Observe the follow safety rules;
DO NOTplace battery and device in fire or high temperature
DO NOTtamper with battery wiring
DO NOTpuncture or damage battery
DO NOTuse battery that appears damaged
DO NOTimmerse or expose battery to water
DO NOTalter or modify the battery
DO NOTattempt changing the batteryin any manner other than that prescribed inthis manual.
DO NOTdispose of the battery in fire or water.
Failure to heed these warning may result in personal injury and/or property damage.
Assembly and use
charging:
Connect the charger into charging socket (7),
Connect the USB charger to a power supply.
The charging indicator (4) will illuminate to show the charging has started.
NOTE:The charging indicator will turn green when the lamp is fully charged .
Disconnect the charger from the worklight when it has been charged for a sufficient time.
operating the lamp:
CAUTION:Never shine the LED light directly into your or anyone else’s eyes .
1. Switch function: 50%-100%-3W Torch-OFF
2. The lamp can be mounted to a metal surface with the magnets(3)and(8) (back and bottom)
3. Multi-use with double hook, bendable and rotatable stand
Specifications
：
：
：
：
Function:50%-100%-3W Torch-OFF
Charging time
：
：
：
：
2-3hours
Operating time: 2 hours(100%)
Luminous flux: 900 lm
Battery
：
：
：
：
3.7V 4000mAh lithium battery
