background image

Always 

O

n UPS Systems 

 

 

Note 

Note 

  
The instructions contained in this manual are not intended to cover all of the details or 
variations in equipment, or to provide for every possible contingency to be met in connection 
with installation, operation, or maintenance.  Should further information be desired or should 
particular problems arise which are not covered sufficiently for the purchaser’s purposes, the 
matter should be referred directly to Always

 O

n UPS Systems Inc. 

The instructions contained in this manual are not intended to cover all of the details or 
variations in equipment, or to provide for every possible contingency to be met in connection 
with installation, operation, or maintenance.  Should further information be desired or should 
particular problems arise which are not covered sufficiently for the purchaser’s purposes, the 
matter should be referred directly to Always

 O

n UPS Systems Inc. 

  
Any electrical or mechanical modifications to this equipment, without prior written consent of 
Always 

O

n UPS Systems Inc, will void all warranties and may void UL/cUL/CSA listing.  

Unauthorized modifications also can result in personal injury, death, or destruction or the 
equipment. 

Any electrical or mechanical modifications to this equipment, without prior written consent of 
Always 

O

n UPS Systems Inc, will void all warranties and may void UL/cUL/CSA listing.  

Unauthorized modifications also can result in personal injury, death, or destruction or the 
equipment. 

  

  
  

Uninterruptible Power Supply 

Uninterruptible Power Supply 

  

Please complete the Warranty Card supplied with this UPS and return it by mail to Always 

O

UPS Systems Inc.  This activates the warranty.  

Please complete the Warranty Card supplied with this UPS and return it by mail to Always 

O

UPS Systems Inc.  This activates the warranty.  
  
If additional information or technical assistance is required call: 

If additional information or technical assistance is required call: 
  
Always 

O

n UPS Systems Inc Sales and Technical Support Line  

Always 

O

n UPS Systems Inc Sales and Technical Support Line  

  
Toll free at 1-877-259-2976 Ext. 451 or (250) 491-9777 Ext. 451 or Fax (250) 491-9775 

Toll free at 1-877-259-2976 Ext. 451 or (250) 491-9777 Ext. 451 or Fax (250) 491-9775 
  
Or E-mail at 

[email protected]

Or E-mail at 

[email protected]

 or visit our web site at 

www.alwayson.com

  

 
Or write to  

 
 

Always 

O

n UPS Systems Inc. 

Bldg 1 – 150 Campion Road, 

Kelowna, BC, 

V1X 7S8, 

Canada 

 
 
 
Please complete the following information for your records. 
 
Model Number:    ______________________________________________________________ 
 
Serial Number:     ______________________________________________________________ 
 
Date of Installation:  ____________________________________________________________ 
 
Inspected By:       ______________________________________________________________ 
 

M0301_N_Series_DM_Manual V1.4 2012-06-12 

Summary of Contents for GES-102NDM






























Reviews: