HB1.25 Wall Mount Installation Guide
HB1.25 Wall Mount Installation Guide
6 of 11
102-000018 - IG110218-A.0
SHOCK HAZARD! May result in serious injury or
death.
Turn power OFF at circuit breaker prior to
installation or servicing.
!
DO NOT PINCH OR PUT EXCESSIVE TENSION ON
WIRES
while joining sections or reattaching end
caps.
Installation: Prepare Wall
3
⁄
16
"
Screw mounting screw in until head is approximately
3/16” from wall surface.
5
Install mounting screw
3
1
⁄
8
"
1
1
⁄
8
"
Install drywall and screw in mounting screws 3 1/8” from
intended end of fixture and 1 1/8” from intended top of
fixture.
4
Install drywall and mounting screws
Make wiring connections between J-Box (from remote
driver) and fixture.
See submittal drawings and diagrams
on pg. 10 for complete wiring instruction.
6
Connect wiring
Installation: Connect Wiring
Install remote driver J-Box(es) in an accessible/
serviceable location. Run low voltage wire from Remote
Driver J-Box to Canopy J-Box in accordance with local/
state/federal regulations.
3
Install Remote Driver J-Box
