Vanguard
™
Drawing Room Table
Tools required:
Phillips screwdriver, slotted screwdriver, pliers, or small wrench.
Assembly Instructions
Wood Parts:
For VAN48
Important notes:
2
A
1pc Tabletop
B
1pc Front Crosspiece
C
1pc Left Leg Frame
D
1pc Right Leg Frame
E
1pc Upper Back Crosspiece
F
1pc Lower Back Crosspiece
G
1pc Footrest
H
1pc Drawer Support, Center
I
2pcs Drawer Supports, Side
J
1pc Drawer
K
1pc Drawer Face
L
1pc Pencil Ledge
M
2pcs Drawer Dividers
A
C
D
H
I
J
K
L
M
Hardware:
1
16pcs Barrel Nuts
2
16pcs Bolts for Frame (2¼")
3
4pcs Leg Levelers
4
1pc Drawer Knob and Bolt Set
5
2pcs Bolts for Center Drawer Support (7/8")
6
6pcs Nuts for Drawer Supports
7
4pcs Bolts for Side Drawer Support (1½")
8
4pcs Bolts for Drawer Face (1")
9
9pcs Screws for Hinges (5/8")
10
8pcs Screws for Tilt Mechanism (3/4")
11
3pcs Screws for Drawer Slide (1/2")
12
2pcs Tilt Mechanisms
13
1pc Drawer Slide
14
12pcs Wood Hole Plugs
15
4pcs Screws for Pencil Ledge (3/4")
Thank you for purchasing this Alvin
®
table
Need assistance with assembly? Call customer service at 1-800-444-2584. Visit us on-line at www.alvinco.com.
1. Power tools for assembly are not recommended. Great care must be taken to avoid
over-tightening screws so that holes are not stripped accidentally.
2. Wood products can be easily scratched if not handled carefully. Please use care
when unpacking and assembling to prevent damage.
1
2
3
4
5
6
7
8
9
10
Barrel Nut
16 pcs
Bolt, 2¼"
16 pcs
Leg Leveler
4 pcs
Drawer Knob and Bolt
1 set
Bolt, 7/8"
2 pcs
Nut
6 pcs
Bolt, 1½"
4 pcs
Bolt, 1"
4 pcs
Screw, 5/8"
10 pcs
Screw, 3/4"
8 pcs
Screw, 1/2"
3 pcs
Tilt Mechanism
2 pcs
Drawer Slide
1 pc
Wood Plug
12 pcs
11
12
14
13
Tabletop
1 pc
Front Crosspiece
1 pc
Left Leg Frame
1 pc
Right Leg frame
1 pc
Upper Back Crosspiece
1 pc
Lower Back Crosspiece
1 pc
Footrest
1 pc
Drawer Support, Center
1 pc
Drawer Supports, Side
2 pcs
Drawer
1 pc
Drawer Face
1 pc
Pencil Ledge
1 pc
Drawer Dividers
2 pcs
E
B
F
G
15
Screw, 3/4"
4 pcs
