Alvaro Banos LeonS90.20-V3 Blanco, Installation Manual

Page: 16 / 41

14
When system is on, ceiling light is on, press button to turn it off, and the corresponding light sign will flash
on the LCD.
3. Fan Function:
When system is on, press button, the fan works, the fan sign will flash; Press button again to turn off
the fan, at the same time, the fan sign is off.
4. Sauna function:
4.1 When the system is on, press button, LCD display the sauna sign, first water discharge for 20 seconds and
automatically water intake. After water reaches the standard level, automatically turn off the water intake valve,
and then heater starts to work. After reach the setting temperature, heater turns off automatically.
4.2. Time setting: default working time is 60 minutes, press button to adjust working time, and press ,
button to adjust sauna time. At the same time, the LCD will display the present time, and the time setting range is
1-120 minutes. If without any operation on , in 5 seconds, automatically quit the setting system.
4.3. Temperature Setting: default temperature is 45 ºC, press button to enter into temperature setting, and
press , to adjust the room temperature, at the same time, the LCD will display present temperature, the
setting range is 25ºC--60ºC. If without any operation on , in 5 seconds, automatically quit the setting system.
4.4 If sauna function used before closing the system, then after closing the system for 1 minute, drain for
3minutes and also ozone works.
4.5 button is multifunctional button, first press, MIN will flash on LED and enter into time setting mode; press
this button again to enter into temperature setting mode, and a temperature sign will flash on LED; if without any
pressing , in 5 seconds, automatically quit the setting mode.
4.6 Discharge: If sauna function is used before turn off the system, then after system is off in 1 minute, system will
water discharge for 3 minutes.
5. FM Digital Radio:
This radio system can receive FM frequency broadcasting channels, the frequency range is between 87MHz—
108MHz, this system contains 8W power amplifier.
5.1. When the system is on, press button to enter into radio mode, the frequency is the last used channel.
Press button again to turn off FM broadcasting.
5.2 Tune: when radio is on, press button to enter into tune setting mode, press , buttons, every press,
the frequency increase or decrease by 0.1MHz.Press button to 108MHz, and then to 87MHz. Similarly, press
button to 87MHz, then to 108MHz.Long press on , to search the channel automatically.