For further information, please contact Alvarion Technical Support at:
Page | 5
DOC00182-00 rev-
B
Grounding
Use provided ground screw to attached grounding
cable to the device.
Warning
: You must always install an external
grounding wire, as shown below. Ensure that you
have completed grounding before you connect power
to the WBSac unit
Connecting the antennas
This section refers to Omni products (-O) only.
Each provided antenna is labeled to show its operating band.
1.
Assemble 2.4GHz antennas on the top of the device.
2.
Assemble 5GHz antennas on the bottom of the device (near the
waterproof POE connector).
3.
All the antennas should be tightened by hand.
