For further information, please contact Alvarion Technical Support at:
Page | 4
DOC00182-00 rev-
B
2.
Insert the provided steel band through the slots of the pole mount bracket, loop it around the pole and
tighten the band screw with appropriate screw driver to ensure that the unit is firmly in place.
Note:
For best performance of WBSac-2450 unit with integrated sector antennas, the recommendation is
to install using a horizontal pole mount, as it offers a wider range of directional adjustment. When
installing such unit on a vertical pole - tilting kit may be required.
Tilting kit is an optional accessory giving the ability to tilt the device up to 30°, to achieve better coverage
Wall Installation
1.
Mark the location of the mounting holes on the wall surface using wall mount base.
2.
Drill a 37 mm deep, 8 mm hole in the markings and hammer the bolts into the openings.
3.
Attach the unit and base assembly to the wall using the provided wall mounting bolts and tighten
them.
